Hydraulic and Fluid Machinery Lab

Leading Manufacturer of flow measurement by venturimeter, study of pressure measurement apparatus, cavitation test rig, electrical analogue, reynolds apparatus and impact of jet apparatus. recirculating type. from Chennai.

Flow Measurement By Venturimeter

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

Flow Measurement By Venturi meter And Orifice meter Re Circulation

DESCRIPTION:-

The unit consist of two pipe emerging out from common manifold along with a venturimeter & orifice meter, tapping are provided to measure pressure differences which are connected to differential manometer. A flow regulating valve is provided at the down speed stream of pipe. A measuring tank is provided to collect the flow. The actual flow rate can be measure are both meters calibrated.

Features:-

A) Two pipes emerging out from a common manifold with a orifice meter.

B) Each line is provided with flow control valve for setting of differential flow rates.

C) Pressure of different pipe lines are connected.

D) Flow control valve at the end of each line assures for full running of pipe.

Range Of Experiments:-

1) Calibration of venturi meter.

2) Calibration of orifice meter.

Specification:

1) Measuring tank & stop watch.

2) Basic piping-1”

3) Orifice meter & venturi meter


Additional Information:

Item Code: Elshaddai-HF-003

Minimum Order Quantity: 1 Number

Yes! I am interested

Study Of Pressure Measurement Apparatus

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

Product Details:

Minimum Order Quantity1 Number
BrandELSHADDAI
ApplicationLaboratory, EDUCATIONAL INSTITUTIONS

This is a board mounted model which demonstrates various types of pressure measurement devices used in common practice. The devices incorporated are

i) Single well Manometer.

ii) Differential Manometer.

iii) Sensitive Manometer.

iv) Pressure Gauge.

v) Vacuum Gauge.

These devices are coupled to suction and discharge piping of Hydraulic Bench Pump and a close circulation systems is established, with this set up, the working and operating principle of the pressure measuring devices can be studied.

 


Additional Information:

Item Code: Elshaddai-HF-011

Yes! I am interested

Cavitation Test Rig

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

Technical specification.

1) 600x600x1500mm -level tank

 

2) 600x600x1500mm-pressure tank.

3) Pump-3HP laxmi make.

4) 2” GI piping and valve.

5) 2” Acrylic venture meter- for flow measurement.

6) 2 no- pressure gauges.

 

Hydraulic bench 1

1) size of bench : 1250mm x 800 mm.

2) Measuring tank : 400 x 300 x 300 mm

3) Sump tank -900 x 400 x 400 mm

4)

Pump

- ½ HP 1 Phase AC

5)

Piping

- 1 ” GI piping with Valve

Range of Experiment :

1) Notch apparatus – 60 0 V notch , rectangular, trapezoidal ,

1) Venturi and orifice meter

2) Bernoulli’s theorem apparatus.

 

Hydraulic bench 2

1) size of bench : 1250mm x 800 mm.

6) Measuring tank : 400 x 300 x 300 mm

7) Sump tank -900 x 400 x 400 mm

8)

Pump

- ½ HP 1 Phase AC

9)

Piping

- 1 ” GI piping with Valve

 

Range of Experiment :

1) Losses in pipe fitting

2) Losses in pipe friction

3) Impact of jet .


Additional Information:

Item Code: Elshaddai-HF-016

Yes! I am interested

Electrical Analogue

REQUEST CALLBACK
Approx. Rs 35,000 / Number

Get Best Quote

 

Basic Aim of this Apparartus / Set Up is to verify the very fundamental Flow Net Rule – ‘Flow lines and Equipotential lines must always intersect at right angles’.

 

As we know, Ground Water flows through the voids in a soil which are interconnected. This flow may be called seepage, since the velocities are very small. Also such water flows from a higher energy to a lower energy and behaves according to the general principles of fluid mechanics


Additional Information:

Item Code: Elshaddai-HF-013

Minimum Order Quantity: 1 Number

Yes! I am interested

Reynolds Apparatus

REQUEST CALLBACK
Approx. Rs 38,000 / Number

Get Best Quote

Description:-

The unit consists of a Acrylic tube connected to a tank. At entrance of tube a bell mouth section is provided and at the other end a valve is provide to control the rate of flow. A capillary tube is introduced centrally to the bell mouth to inject die. By varying the rate of flow the Reynolds number changes. This also changes type of flow. Visual observation of die (thread) will indicate the type of flow which can be confirmed from the REYNOLDS number computed.

Features:-

a) Steady flow arrangement

b) Very clear flow visualization

c) Fine control of die thread.

d) Accurate flow measurement & control.


Additional Information:

Item Code: Elshaddai-HF-009

Minimum Order Quantity: 1 Number

Yes! I am interested

Impact Of Jet Apparatus. Recirculating Type.

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

SPECIFICATIONS:-

 

1) Circular box one leak proof of transparent side.

2) Differential lever mechanism & dead weight to measure the force.

3) Measuring tank.-400x300x300mm

Nozzle diameter-8.5mm

Plates of shape.

600 inclined.

Curved plate.

C) FLATE

Measuring tank – 400 x 300 x 300mm

sump tank – 900 x 400 x400 mm.


Additional Information:

Item Code: Elshaddai-HF-014

Minimum Order Quantity: 1 Number

Yes! I am interested

Heleshaw Apparatus

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

DESCRIPTION:

 

Flow visualisation apparatus is basically designed on Heleshaw principle of potential flow, which uses water as Fluid medium and dye solution forms the streamlines.

The thin test channel is formed between two acrylic plates and is having entry from the top and exit from the bottom. The model is placed between the acrylic plates. Both the Fluid medium and dye solution are poured into the top containers. The acrylic is kept open from the top so as to facilitate the insertion of the model into the Flow Visualisation Space.

The channel is placed vertically in a strong sturdy frame mounted on a “C” channel. At the outlet the brass cock is provided with an outlet pipe connection for the proper flow of the water.

SPECIFICATIONS:

 

1. Test Channel: White side acrylic plates, both smooth on test side, fixed in rigid framed structure.

 

Nominal Dimensions: 600 mm Long x 250 mm wide app. Depth of Channel can be varied by using different thickness models of rubber to some extent.

2. Dye container with small series of holes to facilitate proper flow of the dye.

EXPERIMENTS:

1. Visual observation of the flow patterns about:

1. Square Model.

2. Triangular Model.

3. Circular Model.

4. Aerofoil Model.

5. Oval/Eye Shaped Model.

Many more such models can be made and tested


Additional Information:

Item Code: Elshaddai-HF-010

Yes! I am interested

Pitot Tube Apparatus

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

INTRODUCTION:

Pitot tube is a small ‘L’ shaped tube, with both end open. The ben d side portion is inserted in the pipe line & the other end is kept open to atmosphere. This end may be connected to a sensitive manometer to measure the head in that plane i.e. path of flow. From this head we can find out the velocity of flow.

APPARATUS:-

A pitot tube made up of small copper tube is held in a pipe line. A screw type arrangement is provided to raise or lower this pitot tube. The open end is connected to a manometer.

 

WATER HAMMER.

Technical specification

Sump tank – sutaible size

Head tank – 600x600x800mm


Additional Information:

Item Code: Elshaddai-HF-015

Yes! I am interested

Losses In Pipe Fitting Apparatus Recirculating Type.

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

DESCRIPTION:-

 

The unit provide study of losses of pipe in various pipe fitting. A differential manometer supply to measure the loss of head in these fitting. A flow control valve is provided. An experiment can be carried out at various flow rates.

FEATURES:-

 

1) Testing of pipe circuit consisting of sudden contraction, sudden enlargement bends etc.

2) Measurement of head loss at each section for various flow conditions.


Additional Information:

Item Code: Elshaddai-HF-005

Yes! I am interested

Hydraulic Flume Assembly

REQUEST CALLBACK
Approx. Rs 1.3 Lakh / Number

Get Best Quote

SPECIFICATIONS:-

1. A hydraulic flume of c/s 200x300 mm & 6000 mm length with transparent window on either sides of 1000 mm length.

 

2. Sliding gates one at upstream and other at the downstream side.

3. Screw jack for change of the slope of the flume.

4. A Sump tank of sufficient capacity.

5. Supply tank with waves damping arrangement.

6. A 1 H.P. centrifugal monoblock pump.

7. A Orificemeter with manometer to measure the discharge. Inlet/throat dimensions: 50/25 mm respectively.

8. Trolley with point gauge for level measurement.

9. Models supplied:


Additional Information:

Item Code: Elshaddai-HF-017

Yes! I am interested

Metacentric Height Of Ship Model Apparatus

REQUEST CALLBACK
Approx. Rs 28,000 / Number

Get Best Quote

DESCRIPTION:-

 

The unit consists of a small tank. Water is poured in it; so that a small ship model can float over it .The ship model is provided with a horizontal guide bar over which a small weight can be slided. Displacement of weight is measured with a scale. A pointer is attached at the centre of ship. When the weight is slide the ship tilts. The angle of tilt is measured by displacement of pointer & from then the metacentric height of ship can be studied.


Additional Information:

Item Code: Elshaddai-HF-008

Yes! I am interested

Flow Over Notches Recirculating Type

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

Technical Specification :

Types of notch: 600 v notch , rectangular notch, Trapezoidal.

Flow channel : 250 x 250x 1250 mm with notches fitting arrangement.

Pipes and Valves

1” G.I. piping and 1” Brass valves.

Water storage Unit

Sump Tank – 900 x 400 x 400 mm M.S. tank with F.R.P. coating. Or S.S. tank.

Tank Capacity – 125 Liters (Approx.).

 

Measurement :

Depth Gauge to measure depth of flow

Measuring tank.=400 x 300 x 300mm with pizometric arrangement.

Tank Capacity – 35 Liters (Approx.)

 

Supply pump set

1/2 H.P.monoblock centrifugal pump.

Electricals and service required

1 Ph 230 volt AC supply

Floor space – 2 m x 2 m with suitable water supply.


Additional Information:

Item Code: Elshaddai-HF-002

Minimum Order Quantity: 1 Number

Yes! I am interested

Flow Through Mouthpiece

REQUEST CALLBACK
Approx. Rs 45,000 / Number

Get Best Quote

Determination of coefficient of discharged (Cd) & coefficient of velocity (CV) & coefficient of contraction (Cc) for orifice.


Supply tank -

1) An arrangement to obtain a steady or quiescent flow.

2) An arrangement to vary the head by changing the position of over flow pipe.

3) Piezometer tube to measure head.

4) An arrangement to measure co-ordinate of jet.


Specification:

1) Main supply tank with orifice & mouthpiece fitting arrangement.

2) Diameter of Orifice-8.5mm,Diameter of mouthpiece-8.5mm.,Nozzle-25mm.&50mm length.

3) Tracer pointer with scale.

4) Measuring tank

5) Stopwatch.

Service Required

1) Suitable Water supply

2) Suitable floor space of 1.5 m. x 1.5 m.


Additional Information:

Item Code: Elshaddai-HF-004

Minimum Order Quantity: 1 Number

Yes! I am interested

 





X