Thermal Engineering Equipments

Pioneers in the industry, we offer multi cylinder petrol engine morse test, single cylinder four stroke diesel engine cut section, single cylinder 4 stroke diesel engine with mechanical load, data acquisition system with diesel engine, single cylinder 4 stroke diesel engine test rig and twin cylinder 4 stroke diesel engine test rig from India.

Multi Cylinder Petrol Engine Morse Test

REQUEST CALLBACK
Approx. Rs 1.25 Lakh / Unit

Get Best Quote

Multi Cylinder Petrol Engine Morse Test
To carry out the following experiments
Experiment to be performed: Morse Test. Engine: 10HP at 1500RPM coupled with loading device on a common base plate.

Additional Information:

Item Code: ELSHADDAI-THR-001

Minimum Order Quantity: 1 Unit

Yes! I am interested

Single Cylinder Four Stroke Diesel Engine Cut Section

REQUEST CALLBACK
Approx. Rs 25,000 / Number

Get Best Quote

Four Stroke Cut Section Model Single cylinder 4 stroke diesel engine for plotting valve timing diagram

Additional Information:

Item Code: ELSHADDAI-THR-006

Minimum Order Quantity: 1 Number

Yes! I am interested

Single Cylinder 4 Stroke Diesel Engine with Mechanical Load

REQUEST CALLBACK
Approx. Rs 1.25 Lakh / Number

Get Best Quote

Single Cylinder 4 Stroke Diesel Engine with Mechanical Load

Features:

  • Performance Test.
  • Heat Balance Test .
  • Engine: 5 HP at 1500 RPM coupled with loading device on a common base plate.

Additional Information:

Item Code: ELSHADDAI-THR-004

Minimum Order Quantity: 1 Number

Yes! I am interested

Data Acquisition System with Diesel Engine

REQUEST CALLBACK
Approx. Rs 3.5 Lakh / Number

Get Best Quote

We are suppliers of Data Acquisition System with Diesel Engine. These are Computerised IC Engine Test Rig with Data Logger.

Additional Information:

Minimum Order Quantity: 1 Number

Yes! I am interested

Single Cylinder 4 Stroke Diesel Engine Test Rig

REQUEST CALLBACK
Approx. Rs 1.25 Lakh / Number

Get Best Quote

TECHNICAL SPECIFICATION:

  • Rated Power = 5 H.P.
  • Rated speed = 1500 rpm
  • Diameter of Bore = 80 mm
  • Stroke Length = 110 mm
  • Diameter of orifice = 20 mm
  • Fuel = Diesel

Additional Information:

Item Code: ELSHADDAI-THR-008

Minimum Order Quantity: 1 Number

Yes! I am interested

Twin Cylinder 4 Stroke Diesel Engine Test Rig

REQUEST CALLBACK
Approx. Rs 1.95 Lakh / Number

Get Best Quote

Twin Cylinder 4 Stroke Diesel Engine Test Rig with Electrical Loading (Alternator)

For Conducting Performance Test, Load Test and Heat Balance Test


Additional Information:

Item Code: ELSHADDAI-THR-005

Minimum Order Quantity: 1 Number

Yes! I am interested

Multi Cylinder Four Stroke Diesel Engine Test Rig

REQUEST CALLBACK
Approx. Rs 1.4 Lakh / Number

Get Best Quote

We are suppliers of Multi Cylinder Four Stroke Diesel Engine Test Rig

Technical Specification:

  • Engine: Multi cylinder, ambassador engine
  • Type : water cooled, 4-s Diesel engine.
  • Rated power : 32 kW @ 3200 rpm
  • Rated idling speed (N) : 650 rpm - 3500 rpm
  • Bore Diameter (D) : 73.02 mm
  • Stroke Length (L) : 88.9 mm
  • Compression Ratio : 9:2:1
  • Fuel : Diesel
  • Calorific value of petrol (CV) : 42,000 KJ/Kg

Additional Information:

Minimum Order Quantity: 1 Number

Yes! I am interested

Single Cylinder Four Stroke Diesel Engine Retardation Test

REQUEST CALLBACK
Approx. Rs 1.15 Lakh / Number

Get Best Quote

We are suppliers of Single Cylinder Four Stroke Diesel Engine Retardation Test.

Type of Loading:

Rope brake drawn dynamometer (mechanical loading)

Single Cylinder 4 Stroke Diesel Engine with Mechanical Loading for conducting Retardation test

Single Cylinder 4 Stroke Diesel Engine Slow Speed Engine

FUEL SPECIFICATIONS:

Fuel : High speed diesel (HSD)

Calorific value : 43,500 KJ/Kg

Density of fuel q : 0.86 g/cc


Additional Information:

Item Code: ELSHADDAI-THR-003

Minimum Order Quantity: 1 Number

Yes! I am interested

VARIABLE COMPRESSION RATIO Petrol Engine Test Rig

REQUEST CALLBACK
Approx. Rs 2.25 Lakh / Number

Get Best Quote

VCR Petrol Engine Test Rig
VARIABLE COMPRESSION RATIO PETROL ENGINE TERST RIG

Additional Information:

Item Code: ELSHADDAI-THR-020

Minimum Order Quantity: 1 Number

Yes! I am interested

Cleveland Flash & Fire Point

REQUEST CALLBACK

Ask for Price

Technical Specifications
Application rangeup to 400 °C (°C/°F selectable)
IgnitionGas
HeatingAccording to methods, programmable and pre-heat mode
Detection of 
flash and fire point
Ionization detector
Sample temperaturePt100 glass probe
Barometric pressure correctionAutomatic correction
SafetyOverheat protection, automatic shut-off
Interfaces3x USB, 1x RS232, LAN

Yes! I am interested

Forced Convection

REQUEST CALLBACK

Ask for Price

We are suppliers of Forced Convection.
  • Self-contained, bench-top mounting
  • Includes three of the most common heat transfer surfaces – flat plate, pinned and finned
  • Simple and safe to use
  • Thermocouples and a sensitive anemometer measure temperatures and air velocity – shown on a digital display
  • Additional hand-held thermocouple probe included – to measure temperatures along the length of the pins and fins of two heat transfer surfaces
  • Variable speed fan and variable power heat source for a range of tests

Essential Services
Bench space needed: 850 mm x 550 mm, plus space for a suitable computer if you need to use the optional VDAS Electrical supply (determined by order): 220 to 240 VAC 50 Hz to 60 Hz at 0.6 A or 110 to 120 VAC 50 Hz to 60 Hz at 1.2 A

Technical Details

Nett dimensions and weight (when assembled with anemometer on duct): 850 mm wide x 550 mm front to back x 1200 mm high and approximately 30 kg (including the three heat transfer surfaces) Approximate packed volume and weight: 0.6 m3 and 40 kg

Yes! I am interested

Guarded Plate Apparatus

REQUEST CALLBACK

Ask for Price

Specification:
  • Guarded hotplate with lateral and lower thermal guards
  • Standard fabric mesh hood meets ASTM D1518 test requirements
  • Optional stainless steel airflow hood adds ISO 11092 (dry) testing capability
  • System includes ThermDAC automatic control and data logging system
  • Two ambient temperature probes included
  • Optional RH sensor (included with airflow hood upgrade)
  • GHP-8.2: 8" test plate with 2" guard, GHP-10.5: 10" test plate with 5" guard

Yes! I am interested

Hc Refrigeration Test Rig

REQUEST CALLBACK

Ask for Price

Specifications:

  • Compressor : Brand new 1 HP
  • Condenser fan : Air cooled
  • Thermostat : 5 degree C to 15 degree C
  • Evaporator : 10 Liters capacity
  • Pressure &Vacuum Compound gauge : any available brand
  • Temperature Measurement : Digital Temperature indicator is provided to measure temperature of refrigerant and water.
  • Voltmeter : 0-300 V
  • Ammeter : 0-20 A

Yes! I am interested

Hydraulic Dynamometer Loading

REQUEST CALLBACK

Ask for Price

Hydraulic dynamometer as shown in the figure below works on the principle of dissipating the power in fluid friction rather than in dry friction.
  • In principle hydraulic dynamometer construction is similar to that of a fluid flywheel.
  • Hydraulic dynamometer consists of an impeller or inner rotating member coupled to the output shaft of the engine.
  • Impeller in this dynamometer rotates in a casing filled with a fluid.
  • Due to the centrifugal force developed in the outer casing, tends to revolve with the impeller, but is resisted by a torque arm supporting the balance weight.
  • The frictional forces generated between the impeller and the fluid are measured by the spring balance fitted on the casing.
  • The heat developed due to dissipation of power in Hydraulic dynamometer is carried away by a continuous supply of the working fluid.
  • The output power can be controlled by regulating the sluice gates which can be moved in and out to partially or wholly obstruct the flow of water between the casing and the impeller.

DYNAMOMETER SPECIAL FEATURES:

 

Material: All the components that come in contact with water such as Rotor, Stator, Controller Valve, Housing etc. are manufactured from sp Aluminum Bronze (4% Nickel, 10% Aluminum). This is found to be the best material to withstand corrosion and cavitations.

Flexure Support: Instead of conventional trunion bearings, Flexure Supports provides best accuracy while torque measurement. High torque measurement accuracy +0.2%with control accuracy of +1% and equipped with high quality imported pulse generator assuring the highest speed measurement accuracy thus helping to achieve best control accuracy of +10 RPM.

 

 

Loading of Engine: In Hydraulic Dynamometer loading is done by Servo Motor with Feedback Potentiometer, fast response, no hydraulic oil, pump or motor required.


Yes! I am interested

Lagged Pipe Apparatus

REQUEST CALLBACK

Ask for Price

RANGE OF EXPERIMENTS TO BE CARRIED OUT :
  
To determine total thermal resistance & thermal conductivity of lagged pipe.
To plot temperature gradient across the lagged material.
The experiments can be conducted at various values of input & calculation can be made accordingly.
To plot Heat input (supplied) Vs thermal conductivity in lagged pipe.
EXPERIMENTAL SETUP :

1. Three numbers of lagged Pipes.
2. Nichrome Wire Heater.
3. Mounting bracket assembly.
4. Set of Thermocouples.

CONTROL PANEL :

1. 12 Channel Digital Temperature Indicator
2. Dimmerstat : 0 - 2 A.
3. Main's On/Off Switch.
4. Voltmeter : 0 - 250 V.
5. Ammeter : 0 - 3 A.
 
SPACE REQUIRED :

1.5 m.(L)x 1.0 m(W) table top.
 
Service Required :
230 v Ac Supply 50 Hz
WEIGHT : @ 90 Kg

Yes! I am interested

Mechanical Dynamometer Loading

REQUEST CALLBACK

Ask for Price

A dynamometer is a device used for measuring the torque and brake power required to operate a driven machine.
Dynamometers can be broadly classified into two types. They are:

  1. Power Absorption Dynamometers: Power Absorption dynamometers measure and absorb the power output of the engine to which they are coupled. The power absorbed is usualy dissipated as heat by some means.
    Examples of power absorption dynamometers are Prony brake dynamometer, Rope brake dynamometer, Eddy current dynamometer, Hydraulic dynamometer, etc.
  2. Power Transmission Dynamometers: In power transmission dynamometers the power is transmitted to the load coupled to the engine after it is indicated on some type of scale. These are also called torque meters.
Specifications
DYNAMOMETER SPECIFICATIONS
Torque4.7Nm to 549Nm 0.48Kg-M to 56Kg-M
RPMUpto 3500 RPM (Max)
Open VentilatedStandard
Stationery coilStandard
Class "F" InsulationStandard
Epoxy protection on coilStandard
Coil volatages0-80 V DC Standard
0% - 100% constant or variable torque loadsStandard Continuous (S1) Duty
AC Tachometer generatorOptional
OverloadUpto 250% Short time

Yes! I am interested

Natural Convection

REQUEST CALLBACK

Ask for Price

Heat Transfer by Natural Convection

1. To determine the overall heat transfer coefficient at the surface of a given vertical metal cylinder by the natural convection method.
2. To determine the value of Nusselt number.


Applications:

Natural convection heat transfer is extensively used in the following areas of engineering:
1. Cooling of commercial high voltage electrical power transformers.
2. Heating of houses by electrical baseboard heaters.
3. Heat loss from steam pipe lines in power plants and heat gain in refrigerant pipe lines in air conditioning applications.
4. Cooling of reactor cores in nuclear power plants, though often the coolant is driven by pumps, resulting in more efficient heat transfer by forced convection.
5. Cooling of electronic devices (chips, transistors) by finned heat sinks, though a fan is often present to augment the natural convection with forced convection.

Specification:

  • Metal bar – Copper, 25 mm O.D., approx. 430 mm long with insulation shell along the length and water cooled heat sink at the other end.
  • Test length of the bar – 240 mm.
  • Thermocouples – Chromel /alumel, 10 nos.
  • Band Nichrome heater to heat the bar.
  • Dimmerstat to control the heat input – 2A, 230 V.
  • Voltmeter and Ammeter to measure the heater input.
  • Multichannel Digital temperature indicator, 0.1°C least count, 0-200°C with channel selector switch.
  • Measuring flask to measure water flow.  

Yes! I am interested

Thermal Conductivity

REQUEST CALLBACK

Ask for Price

The Apparatus follows widely accepted theory of heat conduction in liquids based on Debye’s concept in which the hydroacoustic vibrations (phonons) of a continuous medium(base fluid) are responsible for the heat transfer in liquids. Based on this heat transfer mechanism,Bridgman has obtained a formula,characterized by the direct proportionality between thermal conductivity and sound velocity in pure liquids.

Other properties possible with this Apparatus

  • Adiabatic Compressibility
  • Acoustic Impedance
  • Characterization of Nanofluids/Suspensions
  • Characterization of Ferro/Magnetic Nanofluids
  • Intermolecular Free Length

Yes! I am interested

Twin Cylinder Electrical Dynamometer Loading

REQUEST CALLBACK

Ask for Price

Cope Of Experimentation's:
  • To determine Brake Horse Power
  • To determine fuel consumption
  • To determine specific fuel consumption
  • To determine Brake Thermal Efficiency
Technical Details:

Type of Engine

  • Single cylinder, two stroke, air cooled, Hand start, self lubricating, petrol engine (BAJAJ- New)

Type of Loading

TD-101A Rope Brake Dynamometer
  • Rope Brake arrangement with the brake drum fitted on the engine shaft and provided spring balance.
TD-101B Electric Brake Dynamometer
  • The engine is coupled with electrical alternator with resistance loading arrangement. Digital voltmeter and digital ammeter is provided. 

Fuel measuring system

  • Fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement.

Yes! I am interested

 





X